Which models does the vMAX cover?
The vMAX covers 5 models: KREBS vMAX 2x2, KREBS vMAX 3x3, KREBS vMAX 4x4, KREBS vMAX 6x6, KREBS vMAX 8x8. Former and renamed designations are listed in the models table on this page.
2026-10-03 · 5 models


Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Period | Components |
|---|---|---|
| KREBS vMAX 2x2 | 2026-10-03 | 9 |
| KREBS vMAX 3x3 | 2026-10-03 | 9 |
| KREBS vMAX 4x4 | 2026-10-03 | 9 |
| KREBS vMAX 6x6 | 2026-10-03 | 9 |
| KREBS vMAX 8x8 | 2026-10-03 | 9 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location |
|---|---|---|
| 1 | Recessed impeller | Recessed impeller at the bottom of the vertical pump |
| 2 | Pump casing | Lower wet-end casing |
| 3 | Suction strainer | Suction strainer below the wet end |
| 4 | Pump shaft | Centre of the vertical shaft |
| 5 | Roller bearing | Upper bearing frame above the liquid level |
| 6 | Discharge elbow | Discharge connection at the side of the casing |
| Component |
|---|
| Mounting plate |
| Motor mounting bracket |
| V-belt |
Models with the same components are grouped together; select a group to open its component table.
Models: KREBS vMAX 2x2, KREBS vMAX 3x3, KREBS vMAX 4x4, KREBS vMAX 6x6, KREBS vMAX 8x8
| No. | Component | Location |
|---|---|---|
| 1 | Model-specific component | |
| 2 | Pump casing | |
| 3 | Model-specific component | Outside the pump suction inlet |
| 4 | Pump shaft | |
| 5 | Roller bearing | |
| 6 | Model-specific component | |
| Mounting plate | ||
| Electric motor mounting seat | ||
| Model-specific component |
The vMAX covers 5 models: KREBS vMAX 2x2, KREBS vMAX 3x3, KREBS vMAX 4x4, KREBS vMAX 6x6, KREBS vMAX 8x8. Former and renamed designations are listed in the models table on this page.
The vMAX is also documented under these designations: KREBS vMAX 2x2, KREBS vMAX 3x3, KREBS vMAX 4x4, KREBS vMAX 6x6, KREBS vMAX 8x8.
The vMAX is listed under the KREBS Cyclones and Slurry Pumps brand. Period: 2026-10-03. Status: Historical model.
9 components are recorded, including: Pump casing, Pump shaft, Roller bearing, Mounting plate, Electric motor mounting seat and more. The full list with locations is in the components table on this page.
Envoyez-nous un plan ou un échantillon et indiquez le modèle d'équipement et le nom de la pièce.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Ou contactez-nous directement : +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to drawing, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
Veuillez fournir la marque de l’équipement, le modèle complet et le numéro de série, le nom de la pièce, sa référence ou le numéro du plan, l’indice de révision du plan, la quantité, les exigences relatives au matériau et les conditions de service. Si ces identifiants ne sont pas disponibles, envoyez des photographies et les dimensions principales.
Submit an Enquiry