Which models does the Classifying Tank cover?
The Classifying Tank covers 5 models: 7008-32, 7010-40, 7010-40S44T, 7012-48, 7012-48S54T. Former and renamed designations are listed in the models table on this page.
5 models


Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Components |
|---|---|
| 7008-32 | 4 |
| 7010-40 | 4 |
| 7010-40S44T | 4 |
| 7012-48 | 4 |
| 7012-48S54T | 4 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location |
|---|---|---|
| 1 | Product collecting flume | Product collecting flume below the tank |
| 2 | Classifying tank | Upper tank containing the classifying slurry |
| 3 | Support frame | Steel supporting structure beneath the tank |
| Component |
|---|
| Cone discharge valve |
| Valve seat |
| Discharge elbow |
Models with the same components are grouped together; select a group to open its component table.
Models: 7008-32, 7010-40, 7010-40S44T, 7012-48, 7012-48S54T
| No. | Component | Location |
|---|---|---|
| 1 | Material collecting launder | Product collection position at the lower part of the classification trough |
| Cone -shaped discharge valve | Discharge station at the bottom of the classification trough | |
| Valve seat | Discharge valve joint | |
| Discharge elbow | Between the valve and the collecting launder |
The Classifying Tank covers 5 models: 7008-32, 7010-40, 7010-40S44T, 7012-48, 7012-48S54T. Former and renamed designations are listed in the models table on this page.
The Classifying Tank is also documented under these designations: 7008-32, 7010-40, 7010-40S44T, 7012-48, 7012-48S54T.
The Classifying Tank is listed under the Kolberg-Pioneer brand. Status: Historical model.
4 components are recorded, including: Cone -shaped discharge valve, Valve seat, Discharge elbow, Material collecting launder. The full list with locations is in the components table on this page.
Model-specific components with their own page: Cone -shaped discharge valve, Valve seat, Discharge elbow, Material collecting launder (4 in total).
Envoyez-nous un plan ou un échantillon et indiquez le modèle d'équipement et le nom de la pièce.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Ou contactez-nous directement : +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to drawing, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
Veuillez fournir la marque de l’équipement, le modèle complet et le numéro de série, le nom de la pièce, sa référence ou le numéro du plan, l’indice de révision du plan, la quantité, les exigences relatives au matériau et les conditions de service. Si ces identifiants ne sont pas disponibles, envoyez des photographies et les dimensions principales.
Submit an Enquiry