Which models does the EDK Rotary feed Deagglomerator cover?
The EDK Rotary feed Deagglomerator covers 4 models: EDK2020, EDK2030, EDK2530, EDK3030. Former and renamed designations are listed in the models table on this page.
2026 · 4 models


Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Helically paddled rotor | Helically arranged rotor paddles inside the 2030 inlet | EDK2030 |
| 2 | Housing | Housing surrounding the rotor | EDK2030 |
| Component |
|---|
| Bearing |
| Top knife |
| End seal |
| Shaft packing |
Models with the same components are grouped together; select a group to open its component table.
Models: EDK2020, EDK2030, EDK2530, EDK3030
| No. | Component | Location |
|---|---|---|
| 1 | Screw flight rotor | Center of the feed chamber |
| 2 | Housing | Pressure-bearing housing around the rotor |
| Bearing | ||
| Top cutter | Fixed position above the feed inlet | |
| End seal | Sealing areas at both ends of the rotor | |
| Shaft seal packing | Rotor shaft exit through the housing |
The EDK Rotary feed Deagglomerator covers 4 models: EDK2020, EDK2030, EDK2530, EDK3030. Former and renamed designations are listed in the models table on this page.
The EDK Rotary feed Deagglomerator is also documented under these designations: EDK2020, 20 × 20, EDK2030, 20 × 30, EDK2530, 25 × 30, EDK3030, 30 × 30.
The EDK Rotary feed Deagglomerator is listed under the Jeffrey Rader brand. Period: 2026. Status: Historical model.
6 components are recorded, including: Bearing, Screw flight rotor, Top cutter, End seal, Shaft seal packing, Housing. The full list with locations is in the components table on this page.
Model-specific components with their own page: Screw flight rotor, Top cutter, End seal, Shaft seal packing, Housing (5 in total).
Envoyez-nous un plan ou un échantillon et indiquez le modèle d'équipement et le nom de la pièce.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Ou contactez-nous directement : +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to drawing, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
Veuillez fournir la marque de l’équipement, le modèle complet et le numéro de série, le nom de la pièce, sa référence ou le numéro du plan, l’indice de révision du plan, la quantité, les exigences relatives au matériau et les conditions de service. Si ces identifiants ne sont pas disponibles, envoyez des photographies et les dimensions principales.
Submit an Enquiry