FELUWA MULTISAFE Double Hose-Diaphragm Pumps: Wet-End and Nameplate Identification

OEM examples include TGK 400 – 3 DS 230 (single-acting, three heads) and DGK 500 – 4 DS 350 (double-acting, four heads). Preserve the entire designation including the DS section.

OEM series guide

Identify the installed design before enquiry

FELUWA MULTISAFE pumps use double hose diaphragms activated by a reciprocating piston through hydraulic fluid. The pumped medium follows a linear path through the hose diaphragm and check valves, separated from the pump head and hydraulic area.

FELUWA MULTISAFE Double Hose-Diaphragm Pumps

Wet-end and wear-part identification

OEM examples include TGK 400 – 3 DS 230 (single-acting, three heads) and DGK 500 – 4 DS 350 (double-acting, four heads). Preserve the entire designation including the DS section. source

  • Identify suction and discharge check valves, including single/double and ball/cone execution. [source]
  • Identify both hose diaphragms and their installed size/material record. [source]
  • Record piston and piston-seal service items on the hydraulic side; the double hose diaphragm isolates the conveyed medium. [source]
  • Identify the leakage-compensation control, head pressure-relief valve and hose-diaphragm monitoring system separately. [source]

Nameplate identification

Fields to request: manufacturer as marked; full type/model; serial number; build year if shown; plant tag; a sharp full-plate photograph. Collect the extra technical fields below from equipment records when they are not printed on the plate.

complete_type_code; DS_section; head_count; single_double_acting; valve_execution; hose_diaphragm_record; hydraulic_unit_plate

Identify your parts / send nameplate

Identify your parts / send nameplate

Send the full nameplate photo, model designation, serial number and wet-end photographs. ANRANST quotes aftermarket wear parts after identification; no interchange numbers are published.

Demander un devis

Ou contactez-nous directement : +86 156 3797 3199
zzx@anranst.com

Manufacturing Services in China

From Technical Assessment to Finished-Part Delivery

ANRANST provides customers worldwide with engineering assessment, production at certified foundries to drawing, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.

Veuillez fournir la marque de l’équipement, le modèle complet et le numéro de série, le nom de la pièce, sa référence ou le numéro du plan, l’indice de révision du plan, la quantité, les exigences relatives au matériau et les conditions de service. Si ces identifiants ne sont pas disponibles, envoyez des photographies et les dimensions principales.

Submit an Enquiry