Which brand and type of equipment is the JetShear Mixing System?
The JetShear Mixing System is listed under the Elgin brand. Period: 2018. Status: Historical model.
2018 · 1 model


Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Period | Components |
|---|---|---|
| JetShear Mixing System | 2018 | 5 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Bypass isolation valve | Manual valve on front bypass line | JetShear Mixing System |
| 2 | Additive hopper | Additive hopper above mixing unit | JetShear Mixing System |
| 3 | Venturi mixer | Mixer housing below hopper | JetShear Mixing System |
| Component |
|---|
| Shear nozzle |
| Liquid injection port |
| Static mixer |
Models with the same components are grouped together; select a group to open its component table.
| No. | Component | Location |
|---|---|---|
| 1 | Bypass isolation valve | Mixing and bypass circuit |
| 3 | Venturi mixer | Core flow passage of the mixing system |
| Shear nozzle | Liquid shearing and mixing position | |
| Liquid inlet | Additive liquid inlet point | |
| Static mixer | Polymer in-line mixing pipe section |
The JetShear Mixing System is listed under the Elgin brand. Period: 2018. Status: Historical model.
5 components are recorded, including: Venturi mixer, Shear nozzle, Liquid inlet, Bypass isolation valve, Static mixer. The full list with locations is in the components table on this page.
Model-specific components with their own page: Venturi mixer, Shear nozzle, Liquid inlet, Bypass isolation valve, Static mixer (5 in total).
Envoyez-nous un plan ou un échantillon et indiquez le modèle d'équipement et le nom de la pièce.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Ou contactez-nous directement : +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to drawing, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
Veuillez fournir la marque de l’équipement, le modèle complet et le numéro de série, le nom de la pièce, sa référence ou le numéro du plan, l’indice de révision du plan, la quantité, les exigences relatives au matériau et les conditions de service. Si ces identifiants ne sont pas disponibles, envoyez des photographies et les dimensions principales.
Submit an Enquiry