What other names or designations is the Dominion Francis known by?
The Dominion Francis is also documented under these designations: Francis.
1979 · 1 model


Select a model to jump to its component table; former and renamed designations are listed under “Historical names / renamings”.
| Model | Historical names / renamings | Period | Components |
|---|---|---|---|
| Dominion Francis | Francis | 1979 | 4 |
The numbers on the diagram correspond one to one with the rows below.
| No. | Component | Location | Applies to |
|---|---|---|---|
| 1 | Runner | Outer boundary of complete runner in Fig. 2 | |
| 2 | Runner blade | Blade body between crown and ring | |
| 3 | Runner crown | Upper crown in Fig. 2 | |
| 4 | Runner ring | Lower ring in Fig. 2 |
Models with the same components are grouped together; select a group to open its component table.
| No. | Component | Location |
|---|---|---|
| 1 | Runner | Center of the water guiding passage |
| 2 | Runner blade | Between the runner band and the crown |
| 3 | Runner crown | Upper part of the runner |
| 4 | Runner lower ring | Lower part of the runner |
The Dominion Francis is also documented under these designations: Francis.
The Dominion Francis is listed under the Dominion brand. Period: 1979. Status: Historical model.
4 components are recorded, including: Runner, Runner blade, Runner crown, Runner lower ring. The full list with locations is in the components table on this page.
Model-specific components with their own page: Runner, Runner blade, Runner crown, Runner lower ring (4 in total).
Envoyez-nous un plan ou un échantillon et indiquez le modèle d'équipement et le nom de la pièce.
Provide the equipment model, drawing for engineering review and quotation. If service life or wear is a concern, describe the operating conditions as well.
Ou contactez-nous directement : +86 156 3797 3199
zzx@anranst.com
ANRANST provides customers worldwide with engineering assessment, production at certified foundries to drawing, quality control and finished-part delivery for custom wear parts and industrial spares, with scope to support other custom industrial parts.
Veuillez fournir la marque de l’équipement, le modèle complet et le numéro de série, le nom de la pièce, sa référence ou le numéro du plan, l’indice de révision du plan, la quantité, les exigences relatives au matériau et les conditions de service. Si ces identifiants ne sont pas disponibles, envoyez des photographies et les dimensions principales.
Submit an Enquiry